Radon and Drinking Water from Private Wells
What is radon?
Radon is a colorless, tasteless, odorless, radioactive gas. It occurs naturally and is produced by the breakdown of uranium in soil, rock, and water. It can also dissolve into our water supply.
Where and how does radon get into drinking water?
While most radon-related deaths are due to radon gas accumulated in houses from seepage through cracks in the foundation, 30 to 1,800 deaths per year are attributed to radon from household water. High levels of dissolved radon are found in the groundwater in some areas flowing through granite or granitic sand and gravel formations. If you live in an area with high radon in groundwater it can get into your private well. Showering, washing dishes, and laundering can disturb the water and release radon gas into the air you breathe.
How can I find out whether there is radon in my drinking water?
If you suspect a problem and your drinking water comes from a private well, Please contact Idaho Radon at 208-994-9655 to perform tests on your drinking water.
How do I remove radon from my drinking water?
Radon can be removed from water by using one of two methods:
- Aeration treatment - spraying water or mixing it with air and then venting the air from the water before use, or
- GAC treatment - filtering water through granular activated carbon. Radon attaches to the carbon and leaves the water free of radon. Disposing of the carbon may require special handling if it is used at a high radon level or if it has been used for a long time.
In either treatment, it is important to treat the water where it enters your home (point-of-entry device) so that all the water will be treated. Point-of-use devices such as those installed on a tap or under the sink will only treat a small portion of your water and are not effective in reducing radon in your water. It is important to maintain home water treatment units properly because failure to do so can lead to other water contamination problems. Some homeowners use a service contract from the installer to provide carbon replacement and general system maintenance. Remember to have your well water tested regularly, at least once a year, after installing a treatment system to make sure the problem is controlled.